Trouble activating K-1878 Hillsborough River State Park in Florida!

I ran into some problems with the area I was in but worked through them and even grabbed a photo of some local wildlife. So let’s get started…

Finally!!! I GOT MY FOURTH STATE!!! Lol. We had went to Tampa Florida for a few weeks to escape the winter in North Georgia and so I grabbed a couple of radios for some POTA fun.

First, a little about the park. This park was easy to get to and it is a big loop through the wilderness area with pull offs as you go around. There are hiking trails, camping areas as well as playgrounds and other facilities on site. They even have a small outfitters store in the center of the park. All of the parking spaces are pull in angled from the road as you see in the photos throughout the entire park except for the very first one where there is a small visitor area with a historical reference section.

The park is beautiful, and basically shows you what a wild Florida would look like if it was not covered in houses and strip malls. The park does require a fee to access it and you pay when you pull into the entrance.

There is a guard shack and they collect the fee there. I had several park employees travel by my setup while I was operating and no one gave it a second look. I believe this is because my set up is very low impact as the radials are held in place by weights, and the antenna is actually connected to my truck and freestanding.

This parking created a small challenge for me as I tend to need to back into the spaces so that I can deploy my antenna ground system. My solution to this problem was to drive around the Park until I found a section of the parking lot that was vacant of cars. Once I found a vacant parking lot, I could pretty much choose where I wanted to put my truck, so I put it in the furthest corner from any infrastructure which typically lends itself to not ever being in anyone’s way.

As a sidenote, once I had finished my activation, I realized that there was a observer watching from a nearby tree. I am pretty certain this is a red shouldered hawk and it’s very beautiful. There were several of them in the park and I happened to see this one fly down and catch something small on the ground and then flew up to this tree branch in a nearby small tree, where he sat (or she I’m not sure which) until I was able to get my camera and walk over there and take a photo of it.

Onto the Amateur Radio portion of this adventure. Once I found a spot to get out of the way, and that was far from any structures that I could find, I parked in the corner of the parking lot, deployed my antenna system and got out my ICOM IC-705 radio. This is where the trouble began, I learned quickly that there was some sort of interference that was washing over the entire CW portion of the 20 m band. I did not even bother to check the other bands as the only antenna I deployed today was a 20m hamstick.

I jokingly considered it to be similar to the “Russian woodpecker” of days of yore as it sounded like that every few kC. I am pretty sure it is the radar installation at the Zephyrhills municipal Airport as I was in the direct flight path to the runway. My antenna being a vertically oriented radial, is a very noisy antenna anyway so I am leaning towards this deduction to the problem. I have heard RF hash from other devices, and none of them have ever sounded like this. It literally sounded like a woodpecker.

Combine that with the fact that I was only 7 miles distant from the airport. I also had aircraft going overhead occasionally as well. This is what clued me in that the airport was somewhere nearby, and that I was in the flight path, I kept hearing airplanes lol.

I tried a couple of different things to see if the problem would go away and figured out really quick that it was not with my system, and that I could only work with what was there. I even turned down the RF gain in an attempt to hide the noise from me, but that didn’t really help since I would be transmitting sometimes on top of this noise, and that would make people not able to hear me calling CQ. What I wound up doing was looking for a section of the band between the noise spots and setting up in those areas. I finally found a couple near the QRP calling frequency and started calling CQ.

This worked really well as I was able to quickly get 20 QSOs in the log in about 30 minutes. I even got a few of the guys, that I normally get back in Georgia, in the log as well, such as K9IS for instance.

The set up today consisted of the 20m hamstick with radials piped into the truck to the 705 direct with no tuner. The power from the truck powering the radio out of the cigarette lighter port and I was using my little portable travel key that I bought off eBay and that was it, very simple.

So, I guess the moral of the story is don’t give up, even if you have something like the Russian woodpecker beating down your receiver. Just find a spot that is as clear as you can get it and try from there, you never know what you will find.

Thanks and 72

WK4DS